Pre-treatment

COLO-1212W
  • COLO-1212W
  • COLO-1212W
  • COLO-1212W
  • COLO-1212W

COLO-1212W

Wet sandblasting cabinet

The choice of abrasive blasting, if your goal is to remove the surface of the oxide skin, burr, you can use with water chestnut spray material, su white corundum, steel cut pills, silicon carbide, if you are removing internal stress, you can use round sand material, such as cast steel shot.

COLO-1212W water wet sandblasting cabinet
The whole machine is 304 stainless steel plate
Dimensions: 1650mm long * 1200mm wide* 1800mm high
Working size: 1200mm long * 1200mm wide * 850mm high
Sand pump: polyurethane high wear-resistant liquid sand pump
Lighting: 18w fluorescent 1 pc 
Number of guns:1pc (with aluminum boron carbide nozzle)
Shell: 2.0mm cold-rolled steel plate welded
Perspective window: frame 1pc
Sand bucket: 1pc
Foot switch: 1pc
Workbench openings:2, a total of 1 pair of gloves
Door: side door 660mm high * 440mm wide
Air pressure is greater than: 5 bar (kg/cm2)air compressor is about 1 cubic meter of demand-side equipment
Maximum load in the working chamber:100kg
Total power:0.38 KW or so
Total weight:0.38ton
The choice of abrasive blasting, if your goal is to remove the surface of the oxide skin, burr, you can use with
water chestnut spray material, su white corundum, steel cut pills, silicon carbide, if you are removing internal stress, 
you can use round sand material, such as cast steel shot.
Other Products
  • Colo-1212
    Turntable Sandblasting Cabinet
  • COLO-1212W
    Wet sandblasting cabinet
  • colo-P-02
    Dipping pretreatment
  • Colo-P-01
    spraying tunnel
  • colo-BS
    Sandblasting cabinet