Powder coating testing

Colo-E02-01
  • Colo-E02-01
  • Colo-E02-01
  • Colo-E02-01
  • Colo-E02-01

Colo-E02-01

Cross Hatch Cutte

Cross Hatch Adhesion Test Equipment for PAINTS AND VARNISHES

CROSS CUT TESTING EQUIPMENT
 
Product Description
For uniformly marking out a certain size of the lattice, through the evaluation of the coating complete
 degree to assess coating substrate adhesion degree, expressed as a "level". It is mainly used for the 
determination of organic coating cross cut test for adhesion, not only suitable for laboratory, also can 
be applied to various conditions of the construction site.
 
Cutter bit is made of  hard alloy steel. Blade size is strictly controlled within the requirements of the
 standard deviation: Blade addendum width is less than 0.05mm; blade angle of 30 ° ± 1 °. Head of 
 blade design not onlymaintaining the cutter sharpness, but reduced the number of frequent replacement.
Each set of cross-cut device which we are equipped with one piece of 600# 3M tape, and a brush,
a magnifying glass and a plastic carrying case. 
 
1.        1mm blade spacing multi-blade cutting knife is suitable for film thickness <60 um  hard substrate specimens (Metal)
2.        2mm blade spacing multi-blade cutting knife is suitable for film thickness 60~120um soft substrate specimens (wood/ plastic)
3.        3mm blade spacing multi-blade cutting knife is suitable for film thickness 121~250 um hard substrate specimens or soft substrate specimens. 
Technical Data
 
1. Single working side blades: flexible cutting tool carrier, especially suitable for the substrate is not flat. 
2. Multi-cutting blades spacing: 1mm/2mm/3mm
3. The number of square:  25 squares/100 squares
4. The blade tip diameter:   <0.03mm/ <0.06mm
5. Standard configuration: one cross hatch cutter; a roll of 3M (600 type) adhesive tape; a writing brush
 made of wolf's hair; a magnifying glass; a carrying case.
 
Single side cutter ordering information:
    504/2---- cross hatch cutter (1mm/100squares)
    504/3---- cross hatch cutter(1mm/25squares)
    504/4---- cross hatch cutter(2mm/100 squares)
    504/5---- cross hatch cutter(2mm/25squares)
    504/6---- cross hatch cutter(3mm/25 squares)
 
Six working side blades Cutter Ordering information:
 
    502/1----Suit type cross hatch cutter (contains one tool bit)
    502/2---- cross hatch cutter(1mm/100squares)
    502/3---- cross hatch cutter(1mm/25 squares)
    502/4----cross hatch cutter(2mm/100 squares)
    502/5----cross hatch cutter(2mm/25 squares)
    502/6----cross hatch cutter(3mm/25 squares)
Other Products
  • colo-BT-9300H
    Laser Particle Size Analyzer
  • Colo-E02-01
    Cross Hatch Cutte
  • Colo-SMT-7-128-300-K
    Paint and coating Temperature Tracker
  • ETB-0686
    powder coating painting gloss meter
  • colo-8822
    Powder Coating Thickness Gauges